Table of Contents
Advertisement
Searching for POI franchises will
display the same menus as if
searching for POI categories. Follow
the instructions as stated earlier
when searching for POI categories.
Press to access the Show POIs on
Map menu. Press On or Off to
display the icons on the map. If On
is selected, press the desired icons
to show on the map.
Pressing NAV will display the map
along with the selected icons.
Press to display a list of POI exits
while on the highway.
Press to initiate the BACK TRACK
feature.
1. Press to display a split screen
showing detailed information
about the vehicle position. This
feature can also be accessed by
pressing the vehicle information
tab on the lower center of the
display.
2. When on route, press Save to
Address Book to save the
selected destination displayed
on the map.
Press Traffic to display Traffic
Settings. Press to enable or disable
the traffic setting options.
The system lets you adjust the scale
of view on the map. Also, as you
drive, the map scrolls automatically
based on the direction of travel.
There are two methods to change
the map scale:
Press + or
next to the map
scale button on the left bottom
corner of the map screen to
change the zoom level.
Press the actual scale bar at the
bottom of the map to the desired
increment of zoom.
The map scale bar times out if
the zoom level is not changed
within a few seconds.
Advertisement
Table of Contents
