Graco 8487 Owner's Manual page 31

All LATCH seating positoins have tether anchors. If you
want to use the tether, check your vehicle owner's
manual for the location(s). If your vehicle is not
equipped with a tether anchor, it may be possible
to install one. Contact your vehicle dealership for the
proper anchor location and installation. You may
purchase a tether anchor parts kit by calling Graco
Customer Service at 1-888-224-6549.
1. Check that tether is
securely attached to
car seat.
2. Fasten tether clip to
anchor point
3. Tighten the tether strap
securely
4. Check car seat tightness
after securing tether.
If necessary, retighten
vehicle seat belt when
used with the built-in
harness.
5. To loosen, lift up on
the metal tongue of the
Î
buckle
Ì
.
Í
.
.
31
Ì
Í
Î