Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for AEG FAVORIT 77023 MOP
Summary of Contents for AEG FAVORIT 77023 MOP
- Page 1 EN User manual FAVORIT 77023 MOP...
-
Page 2: Table Of Contents
12. ENVIRONMENT CONCERNS ..........16 FOR PERFECT RESULTS Thank you for choosing this AEG product. We have created it to give you impeccable performance for many years, with innovative technologies that help make life simpler –... -
Page 3: Safety Instructions
ENGLISH SAFETY INSTRUCTIONS Before the installation and use of the ap- • The water inlet hose has a safety valve pliance, carefully read the supplied in- and a sheath with an inner mains ca- structions. The manufacturer is not re- ble. - Page 4 – Staff kitchen areas in shops, offices completed. There can be detergent and other working environments on the dishes. – Farm houses WARNING! – By clients in hotels, motels and oth- Risk of electrical shock, fire or er residential type environments burns.
-
Page 5: Product Description
ENGLISH 2. PRODUCT DESCRIPTION Worktop Water hardness dial Top spray arm Rinse aid dispenser Upper spray arm Detergent dispenser Lower spray arm Cutlery basket Filters Lower basket Rating plate Upper basket Salt container 3. CONTROL PANEL A B C... -
Page 6: Programmes
On/off button Delay button Program button Start button Programme indicators Indicators Display Option button Indicators Description Multitab indicator. ExtraHygiene indicator. Washing phase indicator. Rinsing phase indicator. Drying phase indicator. End indicator. Rinse aid indicator. This indicator is off while the programme operates. - Page 7 ENGLISH Programme Degree of soil Programme Options Type of load phases Normal soil Prewash ExtraHygiene Crockery and cut- Wash 50 °C lery Rinses Normal soil Wash 55 °C ExtraHygiene Crockery and cut- Rinses lery Normal or light soil Wash 45 °C Delicate crockery Rinses and glassware...
-
Page 8: Options
5. OPTIONS Activate or deactivate the op- 2. Set the water softener to the highest tions before the start of a pro- level. gramme. You cannot activate or 3. Make sure that the salt container and deactivate the options while a the rinse aid dispenser are full. -
Page 9: Adjusting The Water Softener
ENGLISH 6.1 Adjusting the water softener Water softener Water hardness adjustment German French mmol/l Clarke Manual Elec- degrees degrees degrees tronic (°dH) (°fH) 51 - 70 91 - 125 9.1 - 12.5 64 - 88 43 - 50 76 - 90 7.6 - 9.0 53 - 63 37 - 42... -
Page 10: Daily Use
10 www.aeg.com 6.2 Filling the salt container Turn the cap counterclockwise and open the salt container. Put 1 litre of water in the salt con- tainer (only for the first time). Fill the salt container with dishwash- er salt. Remove the salt around the opening of the salt container. -
Page 11: Setting Mode
ENGLISH 7.1 Using the detergent Press the release button (B) to open the lid (C). Put the detergent in the compart- ment (A) . If the programme has a prewash phase, put a small quantity of deter- gent on the inner part of the appli- ance door. -
Page 12: Hints And Tips
12 www.aeg.com Cancelling the delay start 1. Press the on/off button to deactivate the appliance. while the countdown operates 2. Close the water tap. Press Delay again and again until: If you do not press the on/off • The display shows the programme du- button, the Auto Off device au- ration. -
Page 13: Care And Cleaning
ENGLISH • Make sure that the spray arms can Do not use more than the correct move freely before you start a pro- quantity of detergent. Refer to gramme. the instructions on the detergent packaging. 8.3 Using salt, rinse aid and 8.4 Before starting a detergent programme... -
Page 14: Troubleshooting
14 www.aeg.com To disassemble the filter (A), pull apart (A1) and (A2). Remove the filter (B). Wash the filters with water. Put the filter (B) to its initial position. Make sure that it assembles correct- ly under the two guides (C). - Page 15 ENGLISH Problem Possible cause Possible solution You did not press Start. Press Start. The fuse in the fuse box is Replace the fuse. damaged. The delay start is set. Cancel the delay start or wait for the end of the countdown.
-
Page 16: Technical Information
16 www.aeg.com 2. Make sure that the appliance is in setting mode. Refer to ‘SETTING AND STARTING A PROGRAMME’. 3. Press and hold Delay and Start at 5. Press Option to change the setting. the same time until the indicators (A), (B) and (C) flash. - Page 17 ENGLISH...
- Page 18 18 www.aeg.com...
- Page 19 ENGLISH...
- Page 20 www.aeg.com/shop...