User Servicing Instructions; How To Operate - Royal Sovereign RAC-HV20 Owner's Manual

uSER SERVICING INStRuCtIoNS

Grasp plug and remove from the receptacle or other outlet device. Do not unplug by pulling on cord.
(A) Open fuse cover by sliding access cover on top of attachment plug towards plug blades.
(B) Remove fuse carefully by gently pulling out the ends of the fuse from the receptacle. Replace fuse only with 5 amp, 125
Volt fuse.
(C) Install replacement fuse by first placing the end of the fuse into the fuse receptacle which is opposite of the blades of
the plug, then carefully push in the other end. Only push aginast the metal end of the fuse, not the glass center portion.
(D) Close fuse cover by sliding the cover back into the plug until it is completely closed and latches.
A.
Risk of fire. Do not replace attachment plug. Contains a safety device (fuse) that should no be removed.
Discard product if the attachment plug is damaged.

HoW to oPERAtE

• Set the fan on a level and dry surface.
• Plug the power cord into the socket. Making sure the speed control is at OFF position.
To operate the fan, rotate the switch knob to the desired speed
Low(1), Med(2), High(3).
Adjust the fan to your desired angle by moving the head up or down.
B. C.
6
D.