Using the Ethernet Adapter Manager
•
HELP
Launches this document. You need the Adobe Acrobat Reader to read this document.
Configuring the Ethernet Adapter
To configure the Ethernet Adapter, perform the following steps:
1)
2) Click on the Configure button, or double-click on the desired Ethernet
Figure 4-2: Configuration Window
NOTE
4-4
Highlight the Ethernet Adapter that you want to configure.
Adapter listing. The Configuration window
information about the RoamAbout Ethernet Adapter Manager and the
selected unit.
NOTE: The versions listed in the Configuration window may not match your
actual versions.
(Figure
4-2) appears displaying