Denon DVD-770SD Operating Instructions Manual page 8

ENGLISH
(4) Connecting to a AV amplifier with a Built-in decoder
When DVDs recorded in Dolby Digital or DTS are played, Dolby Digital or DTS bitstream signals are output from
the DVD player's digital audio output connectors. If a Dolby Digital or DTS decoder is connected, you can
achieve sound with the power and sense of presence of a movie theater or concert hall.
DVD-770SD
Front speaker (left)
Optical fiber cable
Surround speaker (left)
AV amplifier with a built-in decoder
NOTE:
• Harsh noise that could harm your ears or damage the speakers is generated when a DVD recorded in DTS
is played while using a decoder, etc., that is not DTS-compatible.
2 Connecting an optical fiber cable to the digital audio input connector (OPTICAL)
Remove the dust cap, line up the cable in the proper directly, then insert it securely as far as it goes.
8
Center speaker
Front speaker (right)
Subwoofer
Digital audio input
connector (OPTICAL)
STANDBY
SIGNAL DETECT OUTPUT AUTO PCM DTS DIG AUTO
SURROUND BACK INPUT MODE DIGITAL
Surround speaker (right)
(AV control center)
Line up in proper direction
Sound output from the DVD-770SD's digital audio output connectors
2
In the case of bit stream output
To power outlet
Audio recording format
Dolby Digital
DVD video
MPEG Audio
In the case of PCM output
Audio recording format
48 kHz / 16 ~ 24 bit
DVD Linear
video PCM
96 kHz / 16 ~ 24 bit
Video CD
Music CD 44.1 kHz / 16 bit Linear PCM
MP3 CD MP 3 (MPEG-1 Audio Layer 3)
*1 Only 48 kHz/16 bit sources are output.
*2 When playing copyright-protected linear PCM DVDs, in consideration of copyrights, no digital signals are
output for sources exceeding 48 kHz/16 bits. When playing such sources, either set to "96k>48k" or make
analog connections.
• Linear PCM audio is a signal recording format used for music CDs.
While signals are recorded at 44.1 kHz/16 bit for music CDs, for DVDs they are recorded at 48 kHz/16 bit to
96kHz/24 bit, providing higher sound quality than music CDs.
Settings
DIGITAL OUT
NORMAL
Dolby Digital bitstream
DTS DTS bitstream
2 channels PCM
(48 kHz / 16 bit)
LPCM (44.1 kHz / 48 kHz)
OFF
Copy protection ON Copy protection OFF
No output data (*1) 48 kHz / 16 ~ 24 bit PCM
No output data (*2) 96 kHz / 16 ~ 24 bit PCM
MPEG 1 44.1 kHz / 16 bit PCM
44.1 kHz / 16 bit PCM
32 ~ 48 kHz / 16 bit PCM
PCM
2 channels PCM
(48 kHz / 16 bit)
DTS bitstream
2 channels PCM
(48 kHz / 16 bit)
Settings
ON
48 kHz / 16 bit PCM
48 kHz / 16 bit PCM
44.1 kHz / 16 bit PCM
44.1 kHz / 16 bit PCM
32 ~ 48 kHz / 16 bit PCM