Getting Started; Taking Pictures - Gemini J44416 Instruction Manual

Getting Started

Turn the camera on by pressing the Feature Button once. Press the Feature
Button to cycle through the Feature Modes.
continue to press the Feature button until the LCD displays a number or wait 5
seconds without pressing any buttons.
(Off mode)
oF
(Self-timer mode)
St
Ct (Continuous mode)
AI (Video mode)
CA (Delete all mode)
CL (Delete last mode)
Lr/Hr (Change resolution)
F5/F6 (Select Frequency)
CP/nP (High density mode)
Notes:
After 30 seconds of inactivity, the camera will switch to standby mode. The
LCD will go blank. All images taken will be stored in the camera's memory and
the camera's setting will revert to the default settings.

Taking pictures

Press the shutter button once to take a picture. The counter displayed on the
LCD will decrease showing the number of images left. Note: If the counter
remain unchanged that indicate the image has not been taken.
probably due to low light intensity. Please adjust the lighting and retake the
image. When the counter displays 00, the camera's memory is fully utilized
and no space to take additional images remains. In order to take additional
pictures, you must transfer or upload your images to the PC.
Notes: Ensure that neither your fingers nor the strap come between the lens
and the subject. If it is dirty, clean the lens as described in the
Cleaning and maintenance section.
To exit the Feature Mode
This is
- 8 -