Troubleshooting - Gemini J44416 Instruction Manual

Storing the camera
If you do not intend to use the camera for a long period of time, remove the
batteries before storing the camera.
Cleaning your Camera
Use a blower brush to remove dust from the lens and LCD surface and
then wipe lightly with a soft, dry cloth. If any soiling remains, apply a small
amount of lens cleaning liquid to a piece of lens cleaning paper and wipe
gently. Do not scratch hard objects against the lens, LCD screen or
viewfinder as these surfaces are easily damaged. Clean the body of the
camera with a soft dry cloth. Do not use volatile substances such as
thinners, benzene or insecticide, as these may react with camera's body
and cause deformities or remove the coating.
When traveling overseas
Do not place your camera in the check-in baggage. Baggage handling at
airports may subject the camera to violent shocks and the camera may be
damaged internally even when no external damage is visible.

Troubleshooting

The troubleshooting guide is designed to help you.
For Windows® User:
Symptom
All the images I have taken do
not appear.
I cannot upload images to the
PC.
The battery indicator is less
than half.
Problem
You have lost power to your J44416 by either:
Insufficient battery power.
The battery was removed
before the camera was
connected to the PC.
Connection failure.
There is insufficient power.
Solution
Upload all images to your PC as
soon as possible. Refer to
Battery Guidance section in the
User's Manual.
To retain the images in the
camera's memory while
changing the batteries, you must
first connect the camera to a PC
via the USB cable. The USB will
supply power to the camera
making it safe to change the
batteries.
Check to make sure all cable
connections are secure.
To retain the images in the
camera's memory while
changing the batteries, you must
first connect the camera to a PC
via the USB cable.
will supply power to the camera
making it safe to change the
batteries.
The USB
- 19 -