Table of Contents
Advertisement
10 electrolux
• Close the dispenser drawer.
Warning! Do not use the flap in
"DOWN" position with:
• Gelatinous detergent or thick deter-
gent.
• Powder detergent.
• With programmes with prewash.
• Do not use liquid detergent if the
washing programme doesn't start
immediately.
In these cases, use the flap in "UP"
position .
SELECT THE REQUIRED PROGRAMME
BY TURNING THE PROGRAMME
SELECTOR DIAL (1)
You can choose the right programme for
any type of laundry following the descrip-
tions on the washing programme tables
(see «Washing Programmes»). Turn the
programme selector dial to the required
programme. The programme selector de-
termines the type of washing cycle (e.g.
water level, drum movement, number of rin-
ses) and the washing temperature accord-
ing to the type of laundry. The pilot light of
button 6 starts blinking and the display
shows the duration of the selected pro-
gramme. The selector dial can be turned ei-
ther clockwise or counterclockwise. Posi-
tion
to Reset programme/Switching OFF
the machine.
For the description of each washing
programmes of the selector dial, con-
sult the chapter «Washing pro-
grammes».
At the end of the programme the selec-
tor dial must be turned to position
to switch the machine off.
Caution! If you turn the programme
selector dial to another programme
when the machine is working, the red
pilot light of button 6 will blink 3 times
and the message Err is displayed on
the display to indicate a wrong
selection. The machine will not perform
the new selected programme.
REDUCE THE SPIN SPEED BY
PRESSING BUTTON 2
When the required programme has been
selected, your appliance automatically pro-
poses the maximum spin speed provided
for that programme.
Press button 2 repeatedly to change the
spin speed, if you want your laundry to be
spun at a speed different from the one pro-
posed by the washing machine. The rele-
vant light will light up.
SELECT THE AVAILABLE OPTIONS BY
PRESSING BUTTONS 2, 3 AND 4
Depending on the programme, different
functions can be combined. These must be
selected after choosing the desired pro-
gramme and before starting the pro-
gramme. When these buttons are pressed,
the corresponding pilot lights illuminate.
When they are pressed again, the pilot
lights go out. If an incorrect option is selec-
ted, the integrated red pilot light of the but-
ton 6 flashes for 3 times.
For the compatibility among the wash-
ing programmes and the options see
chapter «Washing Programmes».
SELECT THE DELAY START BY
PRESSING BUTTON 7
Before you start the programme, if you wish
to delay the start, press the button 7 re-
peatedly, to set the desired delay. The set
delay time value (up to 20 hours) will appear
on the display a few seconds, then the du-
ration of the programme will appear again.
,
Advertisement
Table of Contents
