Connecting To A Tv Signal - GPX KCLD8887DT Instruction Manual

Connecting to a TV signal

The unit has a 181 Channel Cable-Ready
NTSC TV Tuner and Digital ATSC TV Tuner.
The Digital ATSC TV Tuner will only work
when connected to an ATSC TV Antenna.
1. Connect an Off Air Antenna or Cable TV
Coaxial to the TV Antenna Input.
. Turn the unit on by pressing the Power
Button.
. Lower the LCD TV Screen, and rotate it
until it is front facing.
4. Press the TV Button to switch the unit to TV
Mode.
5. If an Off Air Antenna connection was made,
switch the unit to ATSC Mode by pressing
the TV Mode Button.
Press the Scan/Slow Button on the remote to
automatically scan and memorize available
off air channels.
6. If a Cable TV Coaxial connection was made,
switch the unit to NTSC Mode by pressing
the TV Mode Button.
Press the Scan/Slow Button on the remote to
automatically scan and memorize available
Cable TV channels.
7. Use the Volume Buttons to adjust the
volume of the TV.
TIMER TIMER EQ EQ TUNER TUNER
STOP/BAND STOP/BAND PLAY/P PLAY/PAUSE A A P P USE A TV MODE
DOWN DOWN UP UP MEM UP MEM UP
R R L L
AC~ AC~
VIDEO IN VIDEO IN AUDIO IN AUDIO IN
TV ANT
FM ANT FM ANT
R R L L
VIDEO IN VIDEO IN AUDIO IN AUDIO IN
R R L L
VIDEO IN VIDEO IN AUDIO IN AUDIO IN
DVD DVD OPEN/CLOSE OPEN/CLOSE
TV CHANNEL
TV
DOWN DOWN UP UP
VOLUME
7