Table of Contents
Advertisement
Operating instructions
3. Fill with rinse aid, up to the broken
line as a maximum; this line corre-
sponds to a quantity of approx.
150 ml
4. Replace the lid and tighten by turn-
ing clockwise.
5. If rinse aid has been spilt, wipe up
with a cloth. Otherwise there will be
too much foam during washing.
Adjusting Rinse Aid Dosing
Rinse aid is added to the wash water from the container when the
3
dishes are rinsed. The dose can be adjusted from 1-6, corresponding to
3
1-6 cm
dose when streaks, milky spots or dried water drops are to be seen on
glasses and dishes.
(see under "What to do, if...").
0
1. Turn the lid of the container
¼ of a turn anticlockwise and
remove.
2. Adjust the dose setting with a tea
spoon.
3. Replace the lid and tighten by turn-
ing clockwise.
4. If rinse aid has run out, wipe up with
a cloth.
14
rinse aid. The dose is set to "4" in the factory. Only change the
Hide quick links:
Advertisement
Table of Contents
