Replacing The Lamp - Electrolux ERF3865ACW User Manual

Problem
The temperature in
the appliance is too
cold.
The temperature in
the appliance is too
warm.
The temperature in
the refrigerator is too
warm.
The appliance does
not operate.
The lamp does not
work.
Door interferes with
ventilation grill.
Misaligned door.
DEMO appears on
the Display.
As much as the advice does not lead to result, call the nearest brand-mark service.
Possible cause
The Temperature regulator
may be set incorrectly.
The Temperature regulator
may be set incorrectly.
The door is not closed cor-
rectly.
The food temperature is
too high.
There is no cold air circula-
tion in the appliance.
Large quantities of food to
be cooled were put in at
the same time.
The appliance is switched
off.
The mains plug is not con-
nected to the mains socket
correctly.
The appliance has no pow-
er. There is no voltage in
the mains socket.
The lamp is defective.
The door has been open to
long.
The appliance is not level-
led.
The appliance is not level-
led.
The appliance is in demon-
stration mode (DEMO).

REPLACING THE LAMP

The appliance is equipped with a longlife
LED interior light.
ENGLISH
Solution
Set a warmer temperature.
Set a lower temperature.
Refer to "Closing the door".
Let the food temperature
decrease to room tempera-
ture before storage.
Make sure that there is cold
air circulation in the appli-
ance.
Insert smaller quantities of
food to be cooled at the
same time.
Switch on the appliance.
Connect the mains plug to
the mains socket correctly.
Connect a another electrical
appliance to the mains sock-
et. Check fuse. Contact a
qualified electrician.
Refer to "Replacing the
lamp".
Close the door.
Refer to "Levelling".
Refer to "Levelling".
Keep pressed approximately
10 sec the Mode button
since a long sound of buzzer
is heard and the Display
shut off for a short while: ap-
pliance start works regularly.
13