16 www.electrolux.com
REAR SPACERS
DOOR REVERSIBILITY
2
1
A1
3
2
• Install the spacers provided within the
accessory bag as shown in the figure.
• Install the adhesive spacers on the back
side of the appliance.
To change the opening direction of the
door, do these steps:
• Remove the plug from the power socket.
• Remove the ventilation grille. Remove the
filling and install it on the opposite side of
the grille.
A2
• Lay down the appliance back side down
on a wooden support.
• Unscrew the upper hinge (A1) and the
cover washer (A2) and install this on the
opposite side.
• Unscrew the lower hinge (1). Move the
pin to the opposite side (2).
• Unscrew and move the pedal to the op-
1
posite side (3).
• Unscrew and move the bracket to the
other side on the door.
• Screw on the lower hinge on the oppo-
site side.
• Tighten the pin with the adjustment
spanner supplied.
• Raise the appliance and install the venti-
lation grille.