Advertisement
• Fill the tank with COOL
tap water. Distilled water
is not necessary as the
water is filtered by the
Natural Cool Moisture™
filter. DO NOT USE HOT
WATER.
• After filling the tank,
remove the Fill Hose from
the faucet and let any
remaining water drip into
the tank before moving
the other end of the hose.
• Replace the fill cap by
turning it clockwise. DO
NOT OVER TIGHTEN.
NOTE: WHEN CARRYING
THE FILLED WATER TANK,
PLEASE USE THE HANDLE
AND PLACE YOUR OTHER
HAND UNDER THE TANK
FOR ADDITIONAL
SUPPORT.
• Turn the water tank
right-side up and reposi-
tion in the humidifier.
• Some water will empty
into the reservoir base
when the filled water tank
is properly positioned.
NOTE: THE RESERVOIR
BASE HOLDS MORE
WATER THAN THE WATER
TANK; IT MAY, THERE-
FORE, BE NECESSARY TO
FILL THE TANK MORE
THAN ONCE TO FILL THE
HUMIDIFIER COMPLETELY.
• Once the filled tank
has been positioned, do
not attempt to move the
humidifier. If it has to be
moved, unplug the humidi-
fier and remove the water
tank first.
• Reposition the Power
Unit on the left above the
Natural Cool Moisture™
filter.
• Replace the Top Grill
on the right.
NOTE: DO NOT POUR
WATER INTO THE GRILL
THROUGH THE TOP OF
THE POWER UNIT. DOING
SO MAY DAMAGE THE
HUMIDIFIER OR CAUSE
PERSONAL INJURY.
O P E R A
T I O N
• With the power switch
in the OFF position, plug
the filled humidifier into a
polarized 120V outlet.
DO NOT FORCE THE
POLARIZED PLUG INTO
THE OUTLET; it will only fit
one way.
CAUTION: DO NOT PLUG
IN THE HUMIDIFIER WITH
WET HANDS AS AN ELEC-
TRIC SHOCK COULD
OCCUR.
• Slide the Humidity Level
control to HIGH.
• Turn on the humidifier;
the Power Switch will
illuminate.
• Set the Moisture Output
Control to the desired
speed:
– SUPER for fast
humidifying.
– HIGH for normal.
– QUIET for quieter
operation.
NOTE: IF THE HUMIDIFIER
FAN WILL NOT START —
OR RESTART — WHEN
YOU SELECT A SPEED, THE
HUMIDISTAT MAY BE SET
TOO LOW. MOVING THE
HUMIDITY LEVEL (HUMIDI-
STAT) CONTROL TO A
HIGHER SETTING SHOULD
RESTART THE FAN.
• The length of time of
your humidifier runs will
vary depending on the
quality of construction and
insulation of your room or
house, as well as the fan
speed.
• When a comfortable
humidity level is reached,
lower the Humidistat set-
ting slowly until the fan
stops. The DESIRED
HUMIDITY light will illumi-
nate, indicating that the
desired humidity setting
has been reached. The
Humidistat will automati-
cally restart the fan each
time the humidity level
falls below this setting.
Advertisement
