When The Programme Has Ended - Bosch Maxx4 WFC1200 Instruction Manual And Installation Instructions

When the Programme has Ended

Unloading
the laundry
12
H
The  End" control light comes on.
q Turn the programme selector to 
and, where required:
q Select a programme option (
or r Rinse").
3
q Press the  Start" button.
q At the end of the programme option, turn the
programme selector to 
q Turn off the water tap.
q Open the loading door.
If the loading door cannot be opened:
Wait for 2 minutes (the safety function is active)
or
there is still water in the washing machine if the C
Rinse hold" option was selected.
In this latter case, select the 
programme.
q Unload the laundry.
Caution
Remove any debris (e.g. coins, paper clips) from the
drum and rubber seal - risk of rust formation!
q Leave the loading door open to allow the inside
of the washing machine to dry out.
H
Off",
Q
4
Drain", 
H
Off".
Q
4
Drain" or  Spin"
Spin"