Table of Contents
Advertisement
Customizing the Navigator IV
Viewing FM TMC Traffic
Subscription Information
NoTe: You can only access the traffic
settings if your Navigator IV is connected
to external power and an FM TMC traffic
receiver.
Tools
Settings
> Traffic. Not all
Touch
>
traffic settings are available for all locales.
enable Traffic—turn traffic on and off.
Current—select which provider to use.
Select
auto
to use the best provider for the
area, or select a specific provider to use.
Find More—search for additional TMC
traffic providers. If you are in a new area,
Yes
touch
to clear the provider table.
Subscriptions—view your FM traffic
subscriptions and expiration dates (these are
listed on the main traffic settings page for
North American devices).
34
add (or Subscriptions > add)—add a
new subscription to a traffic service. Go to
www.garmin.com/fmtraffic
to purchase a
subscription.
The traffic subscription code cannot be
reused. You must obtain a new code each
time you renew your service. If you own
multiple FM traffic receivers, you must
obtain a new code for each receiver.
Changing Bluetooth
Technology Settings
Tools
Settings
> Bluetooth.
Touch
>
NoTe: When Bluetooth is enabled,
you can access the Bluetooth settings by
on the Menu page.
touching
Phone or audio—select
add
with a device that has Bluetooth wireless
technology. To listen to high-quality
audio wirelessly, connect to a Bluetooth
headset that supports the A2DP profile. See
pages
19–21. Select
Change
and connect with a different device. The
Navigator IV PIN code (or passkey) is 1234.
Drop—select the device you want to
disconnect, and touch Yes.
remove—select the device you want to
delete from the Navigator IV memory,
and touch Yes.
Bluetooth—enable and disable the
Bluetooth component. The
icon appears on the Menu page if the
Bluetooth component is enabled. To prevent
a device from automatically connecting,
select Disabled.
Friendly Name—enter a friendly name that
identifies your Navigator IV on devices with
Bluetooth technology. Touch Done.
>
oK
to pair
restore—restore the original Bluetooth
settings. This does not clear the pairing
information.
to pair
BMW Motorrad Navigator IV Owner's Manual
Bluetooth
Advertisement
Table of Contents
