BTS25R / BTS25W NFC Enabled Bluetooth Speaker USER MANUAL IMPORTANT ! WARRANTY INFORMATION INSIDE. PLEASE READ Trademark of TEAC Corporation JAPAN www.teac.com.au...
Page 2
2. Keep your purchase receipt to enable you to proceed quickly in the event of a Warranty Service. 3. If you require Warranty Service, please contact the TEAC Customer Support Hotline at 1300 553 315 for assistance. Please ensure that you have the model number, serial number and purchase receipt ready when you call.
Page 3
13. No one is authorised to assume any liability on behalf of TEAC or impose any obligation on it, in connection with the sale of any equipment other than as stated in this warranty and outlined above.
SAFETY INSTRUCTIONS Please read this manual carefully before operating and save it for future reference. Do not install this equipment in a confined or built-in space such as a book case or similar unit, and maintain well ventilated conditions. Do not impede ventilation by covering the ventilation openings with items such as newspaper, tablecloth, curtains etc.
MICROPHONE SKIP DOWN / VOLUME- PLAY/PAUSE/ANSWER/END SKIP UP / VOLUME+ NFC TOUCHPOINT STATUS INDICATOR MICRO USB DC JACK (for charging) LINE IN JACK LINE OUT JACK MICROSD CARD SLOT POWER ON / OFF BLUETOOTH FUNCTION Slide the POWER ON/OFF switch to ON, and the Sneaker Speaker will power on and enter Bluetooth mode automatically.
Page 7
PAIR THE SPEAKER MANUALLY 1. Enable the Bluetooth function on your Bluetooth device. 2. Scan for devices via the Bluetooth menu on your Bluetooth device, and select the “Sneaker Speaker” from the list of detected devices. If you are prompted to enter the PIN code, please enter "0000"...
PLAYING AUDIO VIA LINE IN 1. Connect an Aux In cable (provided) to the LINE IN JACK of the speaker and to the audio output socket on an external audio player such as your MP3 player. 2. The Bluetooth or Micro SD Card function is disabled when the cable is plugged in. 3.
CHARGING THE SPEAKER 1. When the battery is low, the voice guidance system will announce it. 2. Connect the Micro USB plug to the MICRO USB DC JACK of the speaker, then connect the standard USB plug end of the cable to a powered USB port on a computer or other USB charging device, such as the provided AC adapter.
Page 10
TEAC CUSTOMER SUPPORT HOTLINE (TCS) 1300 553 315 Between Monday to Friday – AEST 8.30AM to 6PM...