Table of Contents
Advertisement
3.1.2.
Serial port test
Upon completion of serial connection of BETA903A to PC, users may use hyper-terminal (or
other terminal emulator) to diagnose the communication link. Here is the step guide to install
hyper-terminal at PC end.
STEP1: Run the hyper-terminal on PC, then enter BETA903A, click on OK.
STEP2: A "Connect to" window pops up, on "Connect using", select the applicable COM port,
click OK. To find applicable COM port, Click Control panel – system – hardware -
device manager -COM&LPT ports.
BETA903A USER MANUAL
- 32 -
Advertisement
Table of Contents
