Rear Panel - GoVideo DVR 4200 User Manual

Rear Panel

DVD/VHS OUT (VIDEO/AUDIO (Left/Right))
Connect to a TV or A/V receiver with video
VHS IN LINE 1 (VIDEO IN/AUDIO IN (Left/Right))
Connect the audio/video output of an external
source (Audio system, TV/Monitor, Another VCR).
AC Power Cord
Plug into the power source.
Connect to a TV with RF coaxial inputs.
Connect this terminal to the S-Video Input on a
and audio inputs.
RF OUT(DVD/VHS OUT)
S-VIDEO OUT (DVD OUT)
TV or A/V Receiver.
COMPONENT VIDEO OUT (Y Pb Pr) (DVD OUT)
Connect to a TV with Y Pb Pr inputs.
Connect to a TV with video input.
Do not touch the inner pins of the jacks on the rear
panel. Electrostatic discharge may cause permanent
damage to the unit.
ANTENNA INPUT
Connect the VHF/UHF/CATV antenna to this
terminal.
COAXIAL (DVD digital audio out jack)
Connect to digital (coaxial) input on
audio equipment.
AUDIO OUT (Left/Right)
Connect to an amplifier,
receiver, or stereo
system.
VIDEO OUT (DVD OUT)
11