Goodmans GDR10 User Manual page 71

ADR10 Digital TV Receiver GDR10 Digital TV receiver
71 71
Electrical safety
Read the electrical-safety pages in this guide
you connect the receiver to the mains supply
Make sure your electricity supply is the same volt
printed on the label on the bottom of the main un
The receiver needs a 230-volt (V) 50-hertz (Hz) mai
use any other supply. The receiver
the plug breaks, you cannot reuse the plug. If you
the fuse in a moulded plug you must refit the fuse
or damage the fuse cover, you must not use the p
a rep lacement plug cover or plug.
If you have to change the plug because it is not
socket, o r it is damaged, you should remove it and fit the right plug
using the wiring diagram shown on the next pag
the plug away safely. You could ge
again.
The colours of the wires in the receiver's power le
the coloured markings in your plug, so y
instructions.
•
You must connect the blue wire to the terminal marked with
the letter 'N' or coloured black.
•
You must connect the brown wire to the terminal marked with
the letter 'L' or coloured red.
•
You should not connect anything to the earth terminal of the
plug marked with the letter 'E' or coloured green.
ADR10 Set Top Box ADR10 Set Top Box
age as the voltage
comes with a moulded plug. If
lug until you have
suitable for your
e. You must throw
t an electric shock if you use it
ad may not match
ou should follow these
carefully before
.
it of your receiver.
ns supply. Do not
need to change
cover. If you lose
71 71 71 71