Polaris 2011 GEM Owner's Manual page 70

WINDSHIELD WASHER OPERATION
The windshield washer can be used with the windshield wipers to
remove dirt and debris from the vehicles windshield. To operate
the washer, first turn on the windshield wipers, then press in on the
turn signal lever (1). The washer reservoir (2), located in the motor
compartment should be checked for fluid levels at regular intervals.
Fill the reservoir with windshield antifreeze (not radiator antifreeze)
rated for -25°F (-31°C). Operate the system for a few seconds to
flush out the residual water. To fill, remove the cap (3) and fill with
windshield washer fluid.
Commercial windshield washer solvents are flammable. They could ignite and
result in serious injury or death. Care must be exercised when filling or working
around the washer solution.
Understanding the Optional
Features of Your Vehicle
1
WARNING
3
2
GEM Owner's Manual - Page 69
R