Child Lock - Electrolux WA SL3 M Installation And Maintenance Manual

If you choose C, the wash temperature will
be the same as the intake water temperature.
To change the wash temperature, do as follows:
Switch off the power switch,
on again so that the machine is in start-up mode.
Press the button five times, then press
the button five times. You have to com-
plete these ten button presses within fifteen se-
conds.
Press the programme button,
select the programme you want to change the
wash temperature for.
Then use buttons
(increase time) to choose the wash tem-
perature. As you scroll through to the chosen
temperature it appears at the bottom of the
display alongside the
When your chosen wash temperature appears
press the button again to confirm your
choice.
CHILD LOCK ON
To prevent accidental button pushes on the
button you can activate the child lock
function. The
in for three seconds to activate the machine.
To switch the child lock on or off, do as follows:
Switch off the power switch,
on again so that the machine is in start-up mode.
Press the button five times, then press
the button five times. You have to comple-
te these ten button presses within fifteen se-
conds.
CHANGING SETTINGS
, then switch it
-
(reduce time) and
symbol.
BUTTON
button then must be held
, then switch it
Within three seconds of pressing the
ton for the last time you must then press the
or
want the child lock on or off.
Press
Press
, to
button to choose whether you
to activate the child lock.
to disable the child lock.
WASHING MACHINE
but-
1 1