Incorrect Security Code; Audio System Security; Vehicle Identification (Vid) - Ford 2050 Owner's Handbook Manual

INCORRECT SECURITY
CODE
On all units except 2050
Up to TEN Keycode entry attempts
are allowed with various
consequences if you get it wrong.
The number of attempts is shown in
the display.
If the display reverts to 'CODE'
another entry attempt may be
made immediately.
If the display shows 'WAIT 30', the
unit will be locked for 30 minutes.
Wait until the timer counts down
to zero. When 'CODE' is
displayed, enter the Keycode
again.
After ten incorrect attempts the
unit will be permanently
inoperative and 'LOCK 10' or
'LOCKED' will be displayed.
Contact your local Ford Dealer for
help.
2050
If an incorrect code was entered, the
radio beeps and "WAIT" appears in
the display. This indicates that a
waiting period has started.
Note: Do not switch off the radio
when the display shows "WAIT".
Turning off the radio will cause the
waiting period to start all over again.

Audio system security

You must wait until the display
changes to "CODE" this indicates
that the waiting period has
finished and the correct code can
be entered.
The waiting period doubles each
time an incorrect code is entered.
(1 minute, 2 minutes, 4 minutes,
etc)
VEHICLE IDENTIFICATION
(VID)
Note: For the location of the vehicle
identification number on your vehicle,
please refer to your Owner's
handbook.
On all units except 2050
1. Press and hold the MENU button,
then press it repeatedly to select
a VID display. On Sony units, press
and hold the MENU button.
2. The current vehicle identification
number will be displayed or, if a
number has yet to be entered,
'NO VID', 'VID 00000' or 'CODE
----' appears.
3. Enter your Keycode.
4. The audio unit will mute and the
display will show either a
previously entered vehicle
identification number or a flashing
cursor or a display of zeros.
8