Iomega 1562 Installation Manual page 21

Iomega DataSafe NAS
Then in the Shutdown window, select the Reboot radio button. Then select OK.
You will be prompted to confirm Reboot, select OK. Your DataSafe NAS will now reboot.
You must now close your browser session.
Once rebooted your DataSafe NAS is now ready for use. You may begin sharing files using the default
"Public" share folder located through Network Neighborhood, or create additional shares by
following the instructions in the User's Manual. For further information on modifying or configuring
other areas of your DataSafe NAS unit, see the DataSafe NAS User's Manual provided on the CD.
Normal Power-Down
To power-down your DataSafe NAS under normal conditions, you may use the web interface, by
selecting Maintenance on the menu bar, and then Shutdown, or you may use the soft power switch
on the front panel
After shutdown, to terminate power to all integrated components of DataSafe NAS, switch off the
main power switch on the back panel.
Configuring Your DataSafe NAS 16