Care And Cleaning - Electrolux EWF 106110 A User Manual

10 electrolux
Cancel a programme
1. Turn the programme knob to
cancel the programme and to deacti-
vate the appliance.
2. Turn the programme knob again to ac-
tivate the appliance. Now, you can set
a new washing programme.
The appliance does not drain the wa-
ter.
Open the door
While a programme operates, the appliance
door is locked.
To open the appliance door:
1. Press the Start/Pause button to stop
the programme.
2. Wait for some minutes before to open
the appliance door.
3. Close the appliance door and press
again the Start/Pause button. The pro-
gramme continues.
If the temperature and level of the wa-
ter in the drum are too high, you can-
not open the door.
To open the door do the steps that fol-
low:
1. Turn the programme knob to
deactivate the appliance.
2. Wait for some minutes.
3. Make sure that no water is in the
drum.
Caution! If you deactivate the
appliance, it is necessary to set the
programme again.

CARE AND CLEANING

Warning!
Disconnect the appliance from the mains
supply before you clean it.
External cleaning
Clean the appliance only with soap and
warm water. Fully dry all the surfaces.
Caution! Do not use alcohol, solvents
or chemical products.
Descaling
The water we use contains limescale. If it
becomes necessary, use a water softener
to remove limescales.
At the end of the programme
• The appliance stops automatically.
to
• The indicator of the Start/Pause button
flashes.
• Turn the programme knob to
tivate the appliance.
• Remove the laundry from the appliance.
Make sure that the drum is empty.
• Keep the door ajar, to prevent mildew
and odours.
• Close the water tap.
The washing programme is completed,
but there is water in the drum:
– The Rinse Hold option or a programme
that stops with water in the drum is set.
– The door stays locked.
– You must drain the water to open the
door.
To drain the water:
1. If the spin speed option is available, you
can decrease the spin speed.
2. Press the Start/Pause button. The ap-
pliance drain the water and spin.
3. When the programme is completed:
– The indicator of the Start/Pause but-
ton flashes or the End indicator is on.
– You can open the door.
to
4. Turn the programme knob to
activate the appliance.
Use a special product made for washing
machines. Obey the instructions that you
find on the packaging of the manufacturer.
Do this separately from the laundry wash.
Maintenance wash
With the low temperature programmes it is
possible that some detergent stays in the
drum. Make regularly a maintenance wash.
To do this:
• Empty the laundry from the drum.
• Set the hottest cotton wash programme
• Use a correct quantity of powder deter-
gent with biological properties.
to deac-
to de-