Brookstone SnackMan Instructions Manual page 9

parts you may wipe with a damp cloth:
• Main body
• Chute
• Base
• Sensor
note: do not submerge the
Main BodY in water. do not
fill the reservoir with water.
reasseMBLe
1 . Make sure the SETTINgS KNOB
is turned to
2 . Replace the AUgER .
3 . Make sure the AUgER gear meets
with the MOTOR gear .
4 . Replace the AUgER COVER . Snap
the AUgER COVER into place .
5 . Replace the FUNNEL, making sure
the FUNNEL opening is aligned with
the MAIN BODY .
(see figure 1 for reference)
.
Auger Cover Release Tab
Auger Aligned with Motor
Figure 1
8