Use; Control Panel; Controls - Electrolux EWF 840 Instruction Booklet

Electrolux washing machine
Table of Contents

Advertisement

Use

Control panel

rpm
+
1 Programme chart
A programme chart is in the interior part of the
detergent dispenser drawer.
2 Programme selector dial
The selector dial is divided into following sections:
• Cotton, linen (blue section)
• Synthetics (green section)
• Delicates, wool, soak, rinses, softeners, drain, spin
and mini-programme (grey section)
The selector dial can be turned either clockwise or
anticlockwise.
Position E 60°, E 40°
ENERGY SAVING programme for cotton items.
Position E 60°
corresponds to the ENERGY
SAVING programme for synthetic items.
At the end of the programme the selector dial must
be turned to position 0, to switch the machine OFF.
"
" corresponds to cold wash.
3 Prewash button
Select this option if you wish your laundry to be
prewashed before the main wash (not available for
wool and handwash cycle, miniprogramme and silk).
The Prewash ends with a short spin at 650 rpm in
programmes for cotton and synthetic fabrics,
whereas in the program for delicate fabrics the
water is only drained.
corresponds to the
4 Spin speed button
Press this button repeatedly to change the spin
speed, if you want your laundry to be spun at a
speed different from the one proposed by the
washing machine.
Maximum speeds are:
• Model EWF 840:
for cottons, synthetics and wool: 850 rpm;
for delicates and miniprogramme: 700 rpm
• Model EWF 1040:
for cottons: 1000 rpm;
for synthetics, wool: 900 rpm;
for delicates and miniprogramme: 700 rpm
• Model EWF 1240:
for cottons: 1200 rpm;
for synthetics, wool: 900 rpm;
for delicates and miniprogramme: 700 rpm
Rinse hold position
option, the machine will not drain the water of the
last rinse, so as not to wrinkle the laundry.
At the end of the programme, the porthole remains
lit, the light of the START/PAUSE button goes off,
the pilot lights
and
the water must be drained.
To empty out water there are 2 possibilities
• Select programme
The water is emptied out without spinning.
• Select programme
means of the relevant button and then depress the
START/PAUSE button. The water is emptied out
and the laundry is spun at the selected spin
speed.
Attention! Before selecting programme
,
the selector dial has to be positioned on O
(cancelling).
8
EWF
: When you choose this
remain lit, to indicate that
(draining):
. Select the spin speed by

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents