Operation; Set-Up; Powering Up And Viewing Media - Brookstone 864129 User Manual

operaTion

set-uP

1 . Connect the AC adapter to the projector's DC input and plug the
other end into an outlet . Once connected, the battery indicator light
will illuminate red .
2 . Connect the included HDMI cable to the HDMI port on the projector
and the other end to your device .
noTe: Some devices may require an adapter to connect to your device . To
determine what type of adapter you may need to use, please reference the
Compatibility section of this manual .
3 . If desired, connect a speaker to the 3 . 5 mm audio out jack .

PoWerinG uP anD vieWinG MeDia

1 . Power on the projector by sliding the power switch to the on position .
noTe: After syncing with the projector you may see your device's screen
being mirrored by the projector . Some devices may not have this ability,
but they can still be used with the projector to project videos, photo slide
shows, and some app content (this functionality is app dependent) .
16