Delay Start Button; Sanitize Button; Multitab Button; Half-Load Button - AEG Electrolux Favorit 88015 VI User Manual

Electrolux dishwasher
Hide thumbs Also See for Favorit 88015 VI:
Table of Contents

Advertisement

• end of a washing program,
• number of hours in delay start,
• fault codes,
• deactivation/activation of the audible signals.

Delay start button

Use the delay start button to delay the start of the washing program with an interval
between 1 and 19 hours. Refer to 'Select and start a washing program'.

Sanitize button

This function provides more hygienically clean dishes and glasses. During the last rinse, the
temperature increases to 68°C and is kept above 65°C minimum for 10 to 14 minutes.
This function is not available with all washing programs. Refer to 'Washing programs'.
Press the sanitize button to set the function. The sanitize indicator light comes on, when
the function is selectable.

Multitab button

Press this button to activate/deactivate the multitab function. Refer to 'Multitab function'.

Half-load button

The half-load option is not available for all washing programs. Refer to 'Washing programs'.
• Load dishes in the upper and lower basket .
• Decrease the detergent dosage when you use the half-load option.
• Press the half-load button to set the option.
– The half-load indicator light comes on, when the half-load option is selectable.

Function buttons

Use the function buttons for these operations:
• to set the water softener. Refer to 'Setting the water softener'.
• to deactivate/activate the audible signals. Refer to 'Deactivation/activation of the audible
signals'.
• to deactivate/activate the rinse aid dispenser when multitab function is active. Refer to
'Multitab function'.
• to cancel the washing program in progress or a delay start in progress. Refer to 'Select
and start a washing program'.

Setting mode

The appliance is in setting mode when the digital display shows two horizontal bars.
The appliance must be in setting mode for these operations:
– to set a washing program,
– to set the water softener level,
– to deactivate/activate the audible signals,
– to deactivate/activate the rinse aid dispenser.
If the digital display shows the time of a set program, cancel the program to go back to
the setting mode. Refer to "Select and start a washing program".

Audible signals

You can hear an audible signal:
7
Control panel

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents