AEG Electrolux FAVORIT 88015 VI User Manual
  1. Manuals
  2. Brands
  3. AEG Electrolux Manuals
  4. Dishwasher
  5. FAVORIT 88015 VI
  6. User manual

AEG Electrolux FAVORIT 88015 VI User Manual

Electrolux dishwasher favorit 88015 vi
Hide thumbs Also See for FAVORIT 88015 VI:
Table of Contents

Advertisement

Quick Links

See also: User Manual
FAVORIT 88015 VI
User manual
Dishwasher

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the FAVORIT 88015 VI and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for AEG Electrolux FAVORIT 88015 VI

Summary of Contents for AEG Electrolux FAVORIT 88015 VI

  • Page 1 FAVORIT 88015 VI User manual Dishwasher...

  • Page 2: Table Of Contents

    Contents Thank you for choosing one of our high-quality products. To ensure optimal and regular performance of your appliance please read this instruction manual carefully. It will enable you to navigate all processes perfectly and most efficiently. To refer to this manual any time you need to, we recommend you to keep it in a safe place.

  • Page 3: Operating Instructions

    Safety information Operating instructions Safety information In the interest of your safety and to ensure the correct use, before installing and first using the appliance, read this user manual carefully, including its hints and warnings. To avoid unnecessary mistakes and accidents, it is important to ensure that all people using the appliance are thoroughly familiar with its operation and safety features.

  • Page 4: Installation

    Product description • Keep children well away from the dishwasher when the door is open. Installation • Check your dishwasher for any transport damage. Never connect a damaged machine. If your dishwasher is damaged contact your supplier. • All packaging must be removed before use. •...

  • Page 5: Control Panel

    Control panel Rinse aid dispenser Rating plate Filters Lower spray arm Upper spray arm Optical signal Once the washing programme has started , a point-shaped optical signal shows on the floor beneath the appliance door. If the appliance has been installed higher up with a furniture door mounted flush, the optical signal will be no longer visible.

  • Page 6: Night Cycle Button

    Control panel Indicator lights Salt Illuminates when the special salt has run out. Rinse aid Illuminates when the rinse aid has run out. End of programme Illuminates when the washing programme has ended. 1) The salt and rinse aid indicator lights are never illuminated while a washing programme is running even if filling with salt and/or rinse aid is necessary.

  • Page 7: Setting Mode

    First use Setting mode The appliance is in setting mode when the lights of the programme selection buttons are on and 2 horizontal lines (- -) are visible in the digital display. Always remember that when performing operations such as: •...

  • Page 8: Set The Water Softener

    Set the water softener If you want to use combi detergent tablets such as: "3 in 1", "4 in 1", "5 in 1" etc... set the Multitab function (see "Multitab function"). Set the water softener The dishwasher is equipped with a water softener designed to remove minerals and salts from the water supply, which would have a detrimental or adverse effect on the operation of the appliance.

  • Page 9: Setting Electronically

    Use of dishwasher salt Setting electronically The dishwasher is factory set at level 5. 1. Press the On/Off button. The dishwasher must be in setting mode. 2. Press simultaneously and keep pressed buttons B and C , until the lights of buttons A , B and C start flashing.

  • Page 10: Use Of Rinse Aid

    Use of rinse aid The salt indicator light on the control panel can remain illuminated for 2-6 hours after the salt has been replenished, assuming the dishwasher remains switched on. If you are using salts that take longer to dissolve then this can take longer. The function of the machine is not affected.

  • Page 11: Adjusting The Dosage Of Rinse Aid

    Daily use Adjusting the dosage of rinse aid According to the finish and drying results obtained, adjust the dose of rinse aid by means of the 6 position selector (position 1= minimum dosage, position 6= maximum dosage). The dose is factory set in position 4. Increase the dose if there are drops of water or lime spots on the dishes after washing.

  • Page 12: The Lower Basket

    Load cutlery and dishes • Light items (plastic bowls etc.) must be loaded in the upper basket and arranged so they do not move. For washing in the dishwasher the following cutlery and dishes are not suitable: are of limited suitability: •...

  • Page 13: The Cutlery Basket

    Load cutlery and dishes The cutlery basket WARNING! Long bladed knives stored in an upright position are a potential hazard. Long and/or sharp items of cutlery such as carving knives must be positioned horizontally in the upper basket. Take care when loading or unloading sharp items such as knives. To ensure that all items of cutlery in the cutlery basket can be reached by the water, you should: 1.

  • Page 14: The Upper Basket

    Load cutlery and dishes The upper basket Load smaller, fragile crockery and long, sharp cut- lery in the upper basket. • Arrange items of crockery on and under the folding cup racks so that they are offset from each other and water can reach all items. •...

  • Page 15: Use Of Detergent

    Use of detergent 1. Pull out the upper basket completely. 2. Holding the upper basket by the handle, raise it as far as it will go and then lower it vertically. The upper basket will latch into the lower or the upper position. WARNING! After loading your machine always close the door, as an open door can be a hazard.

  • Page 16: Multitab Function

    Multitab function 2. Fill the detergent dispenser (1) with deter- gent. The marking indicates the dosing levels: 20 = approximately 20 g of detergent 30 = approximately 30 g of detergent. 3. All programmes with prewash need an ad- ditional detergent dose (5/10 g) that must be placed in the prewash detergent cham- ber (2).

  • Page 17: Activation/Deactivation Of The Multitab Function

    Multitab function Once the programme is running, the "Multitab function " can NO longer be changed. If you want to exclude the "Multitab function " you have to cancel the programme setting and then deactivate the "Multitab function ". In this case you have to set a washing programme (and desired options) again. Activation/deactivation of the Multitab function Press the Multitab button: the corresponding indicator light illuminates.

  • Page 18: Washing Programmes

    Washing programmes Washing programmes Programme Degree of Type of Programme description Consumption val- soil load Normal Crockery soil and cutlery NIGHT CYCLE Mixed nor- Crockery, AUTO mal and cutlery, heavy soil pots and 45-70° pans Heavy soil Crockery, INTENSIV cutlery, CARE 70°...

  • Page 19: Select And Start A Washing Programme

    Select and start a washing programme 3) Ideal for washing a partially loaded dishwasher. This is the perfect daily programme, made to meet the needs of a family of 4 persons who only wish to load breakfast and dinner crockery and cutlery. 4) Test programme for test institutes.

  • Page 20: Setting And Starting The Programme With Delay Start

    Select and start a washing programme Setting and starting the programme with delay start 1. After having selected the washing programme, press the delay start button until the number of hours for the delay start appear in the digital display. The start of the selected washing programme can be delayed for between 1 and 19 hours.

  • Page 21: Unloading The Dishwasher

    Unloading the dishwasher Unloading the dishwasher • Hot dishes are sensitive to knocks. The dishes should therefore be allowed to cool down before removing from the appliance. • Empty the lower basket first and then the upper one; this will avoid water dripping from the upper basket onto the dishes in the lower one.

  • Page 22: Cleaning The Spray Arms

    Care and cleaning 3. Turn the handle about 1/4 a turn anti- clockwise and remove the filter system. 4. Take hold of the coarse filter ( A ) by the handle with the hole and remove from the microfilter ( B ). 5.

  • Page 23: Prolonged Periods Of Non-Operation

    What to do if… Prolonged periods of non-operation If you are not using the machine for any prolonged period of time you are advised to: 1. Unplug the appliance and then turn off the water. 2. Leave the door ajar to prevent the formation of any unpleasant smells. 3.
  • Page 24 What to do if… Fault code and malfunction Possible cause and solution The programme does not start. • The dishwasher’s door has not been properly closed. Close the door. • The main plug is not plugged in. Insert the main plug. •...

  • Page 25: Technical Data

    Technical data The wash results are not satisfactory Water drops have dried onto glasses and dishes • Increase rinse aid dosing. • The detergent may be the cause. Contact the detergent manufacturer’s consumer care line. If after all these checks, the problem persists, contact your local Service Force Centre. Technical data Dimension Width - height - depth (cm)

  • Page 26: Installation Instructions

    Installation Lower basket with cutlery basket Cutlery basket 1) If there are cup racks in place on the lefthand side, remove them. Installation instructions Installation WARNING! Any electrical and/or plumbing work required to install this appliance should be carried out by a qualified electrician and/or plumber or competent person.

  • Page 27: Levelling

    Water connection Levelling Good levelling is essential for correct closure and sealing of the door. When the appliance is correctly levelled, the door will not catch on either side of the cabinet. If the door does not close correctly, loosen or tighten the adjustable feet until the machine is perfectly level. Water connection Water supply connections This appliance can be connected to either a hot (max.

  • Page 28: Water Outlet Hose Connection

    Water connection WARNING! Warning! Dangerous voltage. Water outlet hose connection The end of the drain hose can be connected in the following ways: 1. To the sink outlet spigot, securing it to the underside of the work surface. This will prevent waste water from the sink running into the machine.

  • Page 29: Electrical Connection

    Electrical connection Electrical connection WARNING! Safety standards require the appliance to be earthed. Prior to using the appliance for the first time, ensure that the rated voltage and type of supply on the rating plate match that of the supply where the appliance is to be installed. The fuse rating is also to be found on the rating plate.
  • Page 32 www.electrolux.com...

Table of Contents