Page 1
Tall Boy with Bluetooth and Docking for iPhone 5 USER MANUAL IMPORTANT ! WARRANTY INFORMATION INSIDE. PLEASE READ www.teac.com.au Trademark of TEAC Corporation JAPAN...
Page 2
Keep your purchase receipt to enable you to proceed quickly in the event of a Warranty Service. If you require Warranty Service, please contact the TEAC Customer Support Hotline at 1300 553 315 for assistance. Please ensure that you have the model number, serial number and purchase receipt ready when you call.
Page 3
Authorised Service Centre for repair. In this event, proof of purchase is required to support a warranty claim. After the repair, the product will be available for collection by or return to the purchaser at a fee upon request. TEAC in- home service can be made available at a fee upon request.
IMPORTANT SAFETY INSTRUCTIONS • Always read the safety instructions carefully. • Keep this User Manual for future reference. • Keep this device away from humidity. • Lay the equipment on a stable flat surface before setting it up. • Do not place the equipment on soft furnishings. •...
Page 5
MAIN UNIT 1. iPOD/iPHONE DOCK 2. VOLUME +/- BUTTON 3. SOURCE BUTTON 4. LCD DISPLAY 5. STANDBY BUTTON 6. PAIR/PLAY/PAUSE BUTTON 7. TUNE UP/DOWN BUTTON 8. REMOTE SENSOR 9. BLUETOOTH INDICATOR 10. AUX IN L/R AUDIO JACKS 11. FM ANTENNA 12.
3. Enable Bluetooth on your audio source device and scan for available Bluetooth devices. 4. Pair and connect to the iTB55Li on the Bluetooth audio source device. If prompted for a passcode, enter “0000”. When pairing is successful (the LED indicator will stop flashing),...
1.5 minutes while it is ready for reconnection. 2. Scan for Bluetooth devices on the audio source device and select iTB55Li on the list. The LED Bluetooth indicator will stop blinking when the iTB55Li and the device have been reconnected successfully.
BASS +/- button for bass effect. RESET BUTTON In the event that the iTB55Li stops working correctly, you can use a toothpick or a similar small, slender implement to poke the RESET button at the rear of the unit to turn it off automatically.
To connect the unit to an external audio source (eg. MP3 player): 1. Use an audio cable with 3.5mm plugs to connect the audio source’s audio output jack with the iTB55Li’s LINE IN jack. 2. Press the STANDBY button to turn the unit on.
SPECIFICATIONS Power source AC 100-240V~ 50/60Hz Power consumption Output power Treble: 2 x 10W, Subwoofer: 30W (Total: 50W RMS) Remote control CR2025 x 1 Tuner FM 87.5 – 108MHz Speaker size Treble: 2 x 2.5”, Subwoofer: 3.5” Unit weight 3.704 kg Unit dimensions 199(L) x 172(W) x 835(H) mm Operating humidity...
Page 12
TEAC CUSTOMER SUPPORT HOTLINE (TCS) 1300 553 315 Between Monday to Friday – AEST 8.30AM to 6PM...
Need help?
Do you have a question about the iTB55Li and is the answer not in the manual?
Questions and answers