Chapter 5 Application; Access Point Mode; Acces Point Mode; Wireless Ap Client Mode - Planet WAP-1965 User Manual

Chapter 5 Application

This chapter describe the four operating mode of your WAP-1965. The four working modes of WAP-1965
are Access Point, Access Point Client Mode, Wireless Bridge mode and Multiple Bridge mode.

5.1 Access Point mode

With this mode, your Wireless network connection could act as following.
Any of your IEEE802.11b end nodes should found the nearest Access Point to communication with any
other Wireless end-nodes or the wired Ethernet network.
There are two things need to be check for your wireless end nodes, the services set ID (SSID) and the
Wired Equivalent Protocol (WEP), both parameters should the same with your Access Point.

5.2 Wireless AP Client mode

The WAP-1965 can also act as a client on a wireless LAN. When configured as AP Client mode,
WAP-1965 soon makes your connected PC a wireless end node. This mode can be deployed if your end
nodes (already installed with an Ethernet Adapter) do not want to make any change but want to move it
somewhere not easy to have the wire.
In this mode, WAP-1965 will need to accompany with an existing WAP-1965 in access point mode in the
wireless network.
- 48 -