Screwdriver • Keep the cord away from heated surfaces. Safety Key • Run 1.0 must not be used outdoors. Run 1.0 tolerates Side Cap an environment measuring +10°C to +35°C. Air Lube humidity must never exceed 80 %. Incline Bracket Cover...
CONSOLE is on, it can be chosen by pressing “ENTER” then adjusted by pressing SPEED +/- or ELEVATION +/- .The range of counting up is from 0.00 to 999KPH/MPH and 999 to 0.00 with counting down. While counting down to 0.00, the monitor will beep 12 times then the treadmill will stop.
• If necessary clean the treadmill from sweat with a damp cloth. Do not use solvents. • Store the electrical cord where it is clear from all pathways and out of childrens’ reach. Run 1.0 - OWNER’S MANUAL ENGLISH...
OPERATION 1. Insert the Safety key. 2. Press the power button. The monitor will turn on. The program window will display ENTER WEIGHT. Press the SPEED +/- or INCLINE +/- buttons to input your weight. 3. Press ENTER to confirm your setting value. The program window will display SELECT PROGRAM OR PRESS START.
Page 7
T-Lube or further information on by turning the power switch off and on again, and the lubrication and maintenance. treadmill is still not operational, contact your local Tunturi dealer for service. ALIGNING THE RUNNING BELT Monitor belt tracking during exercise and make If you require spare parts, always give the model, serial adjustments as needed.
MOVING AND STORAGE After assembly is complete, you may fold the machine into the upright position for storage. To hold the machine, raise the desk until it locks in to position. NOTE! Make sure you hear the click sound of the deck locking into position.
TO MOVE THE TREADMILL Before moving the Run 1.0, be sure the power cord is unplugged from the wall and the treadmill. Fold up the running deck until it is locked and push the equipment on the transportation wheels. Lower the treadmill carefully onto the floor.