Controls Location - Goldstar MONOCHROME MONITOR MBM-2105GIA Service Manual

FEATURES
2000 display characters in a 8 x 8 dot format.
l
18 MHz bandwidth, medium class, composite signal input.
l
This monitor is compatible with a variety of home and personal computers
l

CONTROLS LOCATION

The MBM-2105GIA monochrome monitor uses a RCA jack connector.
The input signal is input through the RCA jack connector.
The input signal is based on the composite level.
Figure 2 shows the monitor controls on the front and rear panels.
Contrast B r i g h t n e s s P o w e r
Turn on the monitor by pressing the power switch.
The power indicator lights when the power is ON.
Always turn on the monitor before you turn on the
computer.
To turn the power OFF, just press this switch again.
Turn this knob clockwise to increase brightness.
Turn this knob clockvvise
Turn this knob to adjust the vertical size of the
picture.
I n d i c a t o r
Figure 2, Monitor
NOTE: Monitor cabinet not used on 6300T Models.
to increase contrast.
H-Size
H - P o s i t i o n H - H o l d V - S u e P o w e r C o r d
Controls
Turn this knob to stop horizontal rolling of the
picture.
Turn this knob clockwise to move the center of the
picture to the right; turn the knob counterclockwise
to move the center of the picture to the left.
Turn this knob to adjust the horizontal size of the
picture.
Video In