Advertisement
Typical connections to speaker cabinets
Speaker
Cabinet
One 16 ohm cabinet. Total Load = 16 ohm
Use the 16 ohm output jack.
One 8 ohm cabinet. Total Load = 8 ohm
Use the 8 ohm output jack.
4Ω
One 4 ohm cabinet. Total Load = 4 ohm
Use the 4 ohm output jack.
16Ω
Speaker
8Ω
Cabinet
Speaker
Cabinet
16Ω
Two 16 ohm cabinets. Total Load = 8 ohm
Use the 8 ohm output jack.
8Ω
8Ω
Two 8 ohm cabinets. Total Load = 4 ohm
Use the 4 ohm output jack.
MODEL BH112
MAX POWER INPUT 75WATTS RMS
16 OHM PARALLEL JACKS
DESIGNED AND ENGINEERED FOR CRATE IN THE U.S.A. BY BLACKHEART ENGINEERING
MADE IN THE P.R. CHINA - FABRIQUE EN CHINE. ©2007 LOUD TECHNOLOGIES INC. ALL RIGHTS RESERVED
"BLACKHEART" AND "CRATE" ARE REGISTERED TRADEMARKS OF LOUD TECHNOLOGIES INC.
SERIAL NUMBER
MANUFACTURING DATE
From Power Ampli er
Typical way that speaker cabinets are
joined together in parallel. Make sure they
all have the same impedance, and that the
total impedance equals the amplifier out-
put they are connected to.
Speaker
Cabinets
16Ω
in parallel
Speaker
Cabinets
in parallel
MODEL BH112
MAX POWER INPUT 75WATTS RMS
16 OHM PARALLEL JACKS
DESIGNED AND ENGINEERED FOR CRATE IN THE U.S.A. BY BLACKHEART ENGINEERING
MADE IN THE P.R. CHINA - FABRIQUE EN CHINE. ©2007 LOUD TECHNOLOGIES INC. ALL RIGHTS RESERVED
"BLACKHEART" AND "CRATE" ARE REGISTERED TRADEMARKS OF LOUD TECHNOLOGIES INC.
SERIAL NUMBER
MANUFACTURING DATE
Hide quick links:
Advertisement
