Function Piano Key Controls; Function Mode; Resetting To Default Settings - Suzuki Digital piano Owner's Manual

FUNCTION PIANO KEY CONTROLS

C1 C2
DUET PIANO LESSON MODE
The Function mode gives you access to these other features on the digital piano.
REVERB/
EFFECT
METRONOME
VOICE SELECT
DEMO/SONG
REVERB/
EFFECT
METRONOME
C3 D3 E3 F3 G3 A3
PIANO TOUCH
TRANSPOSE
TUNING
MIDI LOCAL CONTROL ON/OFF
MIDI INPUT CHANNEL SELECT
MIDI OUTPUT CHANNEL SELECT
FUNCTION MODE - To engage the function control piano keys.
1. Press the Reverb/Effect button and the Metronome button simulta-
neously. The LED's for both buttons will begin to flash.
Note: When your Suzuki digital piano is in Function Mode with both
Reverb/Effect and Metronome button Led's flashing, there will be no
sound from the piano keys.
2. Press the designated piano key or keys to change the value for the
selected function.
3. To exit the Function Mode press the Voice Select button. The Reverb/
Effect button will stop flashing but remain on. The Metronome button
will turn off.
4. Play the piano, you should hear the piano notes play with your selected
function engaged. It may be necessary to increase or decrease your
selected function.
RESETTING TO DEFAULT SETTINGS - At any time you can easily put the piano
back to its default factory settings. Hold down the Demo/Song button
and the Reverb/Effects button and the piano will reset to the default
settings below. When the power is turned on, these functions are
always set to the default settings.
Touch
Transpose
Tuning
Reverb
Duet Piano Lesson
MIDI Channel Select
MIDI Local Control On/Off
Multi-Timbral Mode On/Off
Transmit MIDI Program Change On
B3 C4 D4 C5
TRANSMIT PROGRAM CHANGE ON/OFF
MULTI TIMBRAL MODE ON/OFF
Normal
0
A4=440.0Hz
On
Off
Channel 1
On
Off
C6 C7 C8
21