Goldmund 19 User Manual page 45

Note: Even if the player is set to All but you select a
group to play from the disc menu, only that group
will play. If you stop playback, all groups will play
again when you restart playback.
Note: If you select an area that isn't on the disc
loaded, a different area will play. For example, if you
choose standard CD audio but the disc loaded is not
a hybrid SACD, the stereo SACD area will play.
3
O P E R AT I N G T H E E I D O S 1 9
3.9
T H E I N I T I A L S E T T I N G S M E N U
O
PTIONS (contd.)
Group Playback
• Default setting: Single
DVD-Audio discs can have up to 9 groups of tracks. When set to Single, the selected group plays
and then the disc stops, or returns to the menu screen. Use Group Search to select the group to
play.
(You cannot use the track skip or scan buttons in this mode.)
Set to All if you want to play all the groups on a disc consecutively.
DVD Playback Mode
• Default setting: DVD-Audio
Some DVD-Audio discs contain DVD-Video content in addition to the DVD-Audio. Set to DVD-
Video to play a DVD-Audio disc as if it were a DVD-Video disc. Note that in this case only the
DVD-Video part of the disc will play.
SACD Playback
• Default setting: 2ch Area
SACD discs can be divided up into several different areas: stereo audio (2ch Area), multi-
channel audio (Multi-ch Area) and, for hybrid SACDs, standard CD audio (CD Area). Select
which you want to listen to.
CD Playback
• Default setting: PCM Playback
When set to PCM Playback, playback is optimized for standard audio CDs. You can also play DTS
CDs, however you may notice some noise when a DTS CD starts playing. This is not a
malfunction.
When set to DTS CD Playback, playback is optimized for DTS CDs. In this mode you cannot play
standard audio CDs through the analog outputs. Change the setting back to PCM Playback to
play standard CDs.
User manual - GOLDMUND EIDOS 19 Universal Player |
P 42