Goldmund 19 User Manual page 38

Note: You can't switch on/off the optical and coaxial
outputs individually.
- There is no digital output when playing SACDs and
some DVD-Audio discs regardless of this setting.
Note: If you set to DTS with a non-DTS compatible
amplifier, noise will be output when you play a DTS
disc.
- This setting applies only to DTS audio on DVDs. DTS-
CD always output DTS digital audio as-is regardless
of this setting.
P 35
| User manual - GOLDMUND EIDOS 19 Universal Player
3
O P E R AT I N G T H E E I D O S 1 9
3.9
T H E I N I T I A L S E T T I N G S M E N U
U I S
SING THE NITIAL ETTINGS MENU
The Initial Settings menu is where you can set preferences for language, audio and video out-
put, and so on.
If a menu option is grayed out it means that it cannot be changed at the current time. This is
usually because a disc is playing. Stop the disc, then change the setting.
1. Press SETUP and select 'Initial Settings' from the on-screen display.
2. Select the setup category from the list on the left, then select an item from the menu list
to the right.
3. Make the setting you want.
D A O S
IGITAL UDIO UT ETTINGS
Digital Out
• Default setting: On
You only need to make this setting if you connected this system to a processor using one of
the digital outputs.
If at any time you need to switch off the digital audio output, set this to Off, otherwise leave it
On.
Dolby Digital Out
• Default setting: Dolby Digital
You only need to make this setting if you connected this system to a processor using one of
the digital outputs.
If your processor is Dolby Digital compatible, set to Dolby Digital, otherwise set to Dolby
Digital > PCM.
DTS Out
• Default setting: DTS > PCM
You only need to make this setting if you connected this system to a processor using one of
the digital outputs.
If your processor has a built-in DTS decoder, set this to DTS,
otherwise set to DTS > PCM (DTS audio is converted to more compatible PCM audio).