Table of Contents
Advertisement
2. Use small flat blade screwdriver or another suitable device to rotate the switches to the
desired setting. (The selected number will appear directly above the white indicator dot
on each switch.) See examples of selected frequencies in the illustration below.
3. To change the operating band from 87.9-107.9MHz to 76-90MHz or vice versa, or to
adjust the modulation compensation pot, remove the top cover to gain access to these
features. See illustrations 2-6 and 2-10.
Illustration 2–7 Transmitter Front Panel (Frequency Selector Switches)
2-6
Illustration 2–6 Top Cover Removed
Megahertz
Illustration 2–8 Two Sample Frequency Selections
Frequency Selector Switches
1
01
.
.
FM600 User's Manual
J20
= 88.10 MHz
= 107.90 MHz
Advertisement
Table of Contents
