Table of Contents
Advertisement
INSTALLATION
Audio / video connection
To connect the DVP 01 to your coach
system, use the cable that is available
from Blaupunkt (special accessories).
Connect the cable to the connections
Q at the back of the unit. Make sure
that the video and audio cables corre-
spond with the unit's jacks.
REMOTE CONTROL
Remote control
The supplied infrared (IR) remote con-
trol gives you access to all of the unit's
functions. The buttons located on the
front of the unit can be operated in the
same way and offer the same functions
as those on the IR remote control.
To ensure that the remote control func-
tions properly, point the IR remote con-
trol at the IR sensor N when you want
to operate the controls.
Instead of the IR remote control, you
can also connect a Blaupunkt cable re-
mote control (available from the stand-
ard product range) to the WIRE RE-
MOTE R connection at the back of the
unit. The cable remote control only of-
fers a limited number of control func-
tions.
You can also control the main functions
of the DVP 01 using the Blaupunkt
BCA... control panel on the coach sys-
tem.
Inserting batteries
The IR remote control requires two AA
type batteries to be able to work. They
are supplied with the unit.
Open the battery compartment at
the back of the remote control.
Insert the batteries in the battery
compartment as shown in the dia-
gram.
Close the battery compartment.
23
Advertisement
Table of Contents
