Table of Contents
Advertisement
B
O
ASIC
PERATIONS
TV/Video Selection
Press POWER on the TV and audio system.
1. Press "TV/VIDEO" on
the TV/monitor, select
VIDEO mode.
DVD
Play Discs
1. Press POWER to
turn on the unit.
3. Press
again to
close the disc tray. The
unit begins to read the
disc.
5. Stop playback.
Press
System Settings
According to the
system of the
TV/monitor, set the
system of the unit
to make it match
the TV/monitor.
DVD
CD
Pause
Pause
TV/Video
CD
Front Panel
2. Press
open the disc tray
and load a disc
with the label side
up.
Front Panel
4. Press
play the disc.
6. Remove the disc and
turn off the power. You
have to push this button
twice to stop playback of
a DVD disc.
DVD
1. If the system of the
TV/monitor is PAL:
System
Press SYSTEM ,
select PAL.
The screen shows:
WHEN PLAYING
PICTURES
If the pictures of DVD are
played, press
to
make playback pause.
The unit enters step play
status. Each time you
press
, the picture
advances one frame.
2. Select the correct audio input for your system.
Each amplifier is different from another, please refer to the
manual of the amplifier. (e.g., connect the audio output of
the DVD player to the DVD audio input of an amplifier.)
Note: this step can be cancelled if you are utilizing the
auxiliary input of a Blaupunkt receiver.
to
Open/Close
(PLAY) to
AFTER STEP 4 IS FINISHED:
PLAY DVD
The TV screen shows DVD menu or title
menu.
PLAY CD
Press
according to the track numbers.
2. If the system of the
PAL
TV/monitor is NTSC:
Press SYSTEM ,
select NTSC.
The screen shows:
WHEN PLAYING MUSIC CD
STEP
Press
pause.
Press
playback.
– 11 –
DVD/LD
(PLAY), the unit plays the disc
NTSC
to make playback
(PLAY) to resume
Advertisement
Table of Contents
