Download Print this page

Black & Decker KA110 Instruction Manual

Hide thumbs


Quick Links




  Also See for Black & Decker KA110

  Summary of Contents for Black & Decker KA110

  • Page 1 KA110...
  • Page 2 Congratulations! On the purchase of your Black & Decker sander. To ensure the best results from your sander please read these safety and usage instructions carefully. If you have any questions or queries after reading this user manual please do not hesitate to call our Service and Information Centre, whose number you will find towards the back of this user manual, or one of our...
  • Page 3: Table Of Contents

    Contents Page 4 Safety instructions Additional precautions to take when sanding paint and MDF Page 5 Double insulation Electrical safety Mains plug replacement Page 6 Extension cables Unwanted tools and the environment The Black & Decker guarantee After sales service for your Black & Decker product Our after sales service policy Accessories Technical data...
  • Page 4: Safety Instructions

    Sander user manual SAFETY INSTRUCTIONS • Maintain the tool with care. Keep a cutting tool Warning! When using electric tools, the following sharp and clean for better and safer performance. basic safety precautions should always be taken to Follow the instructions for lubricating and changing reduce the risk of fire, electric shock and personal accessories.
  • Page 5: Double Insulation

    ENGLISH Any pre-1960 building may have been painted in the against injury resulting from a possible electrical past with paint containing lead, and covered by insulation failure within the tool. additional layers of paint. It is important to determine ELECTRICAL SAFETY whether the paint that is being sanded contains lead Be sure the supply is the same as the voltage given on before beginning work.
  • Page 6: Extension Cables

    ENGLISH Black & Decker service agent because special be totally satisfied with their Black & Decker product purpose tools are required. and after sales service, but if help or advice is needed please contact your local Black & Decker authorised EXTENSION CABLES repair agent who will be happy to help.
  • Page 7: Operating Your Sander

    ENGLISH OPERATING YOUR SANDER into the locked position. To switch your sander Note: Make sure that on, slide the on/off the lever is fully down switch forward until before operating the the mark “I” appears. sander. To switch your sander off, slide the on/off switch to the rear until the mark “O”...
  • Page 8: Dust Extraction System

    We declare that units: An adapter is available from Black & Decker as a part. KA110, KA110E conform to 89/392/EEC, 89/336/EEC, EN55014, 73/23/EEC, EN55104, EN50144 REMOVING AND EMPTYING THE DUSTBAG Disconnect the plug from the electricity supply.
  • Page 10 Australia WALT Industrial Power Tool Company Tel. 03 9895 9200 7 Clarice Road Fax 03 9899 7465 Box Hill, Victoria 3128 New Zealand Black & Decker Tel. 09 579 7600 81 Hugo Johnson Drive Fax 09 579 8200 Penrose, Auckland, New Zealand South Africa Black &...
  • Page 12 Part no: 373697-01 11/00...