Table of Contents
Advertisement
6 electrolux
A control bar
4
5
/
6
The timer display
7
Timer indicators of cooking zones
8
9
10
HEAT SETTING DISPLAYS
Display
-
+ digit
/
/
OPTIHEAT CONTROL (3 STEP
RESIDUAL HEAT INDICATOR)
Warning!
\
burns from residual heat!
OptiHeat Control shows the level of the re-
sidual heat. The induction cooking zones
DAILY USE
ACTIVATION AND DEACTIVATION
Touch
for 1 second to activate or deac-
tivate the appliance.
AUTOMATIC SWITCH OFF
The function deactivates the appliance
automatically if:
• All cooking zones are deactivated (
• You do not set the heat setting after you
activate the appliance.
sensor field
The cooking zone is deactivated.
The cooking zone operates.
The
function operates.
The Automatic Heat Up function operates.
Power function operates.
There is a malfunction.
OptiHeat Control (3 step Residual heat indicator) : continue cook / stay
warm / residual heat.
Lock / The Child Safety Device operates.
Not correct cookware or too small or no cookware on the cooking
zone.
The Automatic Switch Off function operates.
\
The risk of
To set a heat setting.
To increase or decrease the time.
To set a cooking zone.
To show the time in minutes.
To show for which cooking zone you set the time.
To lock/unlock the control panel.
To activate and deactivate the STOP+GO function.
Description
make the heat necessary for cooking di-
rectly in the bottom of the cookware. The
glass ceramic is hot from the heat of the
cookware.
• You spill something or put something on
the control panel for more than 10 sec-
onds, (a pan, a cloth, etc.). An acoustic
signal sounds some time and the appli-
ance deactivates. Remove the object or
clean the control panel.
• The appliance becomes too hot (e.g.
when, a saucepan boils dry). Before you
).
use the appliance again, wait for the
cooking zone to cool down.
function
Advertisement
Table of Contents
