Electrolux A75230-GA3 User Manual page 17

3. Remove the ventilation grille. Remove the filling an install it on the opposite side of
the grille.
4. Lay down the appliance back side down on a wooden support.
5. Unscrew the lower hinge (a1).
Remove the door closure device from
the hinge and move the pin to the other
side (a2). Re-screw the door closure de‐
vice provided within the accessory bag
on the opposite side.
Unscrew and move the pedal to the op‐
posite side (a3).
6. Remove the door closure device on the
door (b1).
Re-screw the door closure device provi‐
ded within the accessory bag on the op‐
posite side (b2).
7. Remove the door.
Unscrew and move the pin to the oppo‐
site side.
8. Re-insert the door.
Re-screw the lower hinge.
Raise the appliance and install the ven‐
tilation grille.
9. Install the handle in the opposite side.
Re-screw the handle bracket on the door
(h4). Turn the handle bracket with the
handle and screw them to the door (h5)
and the fitted handle bracket (h6).
10. Put the cabinet in position.
WARNING!
Reposition, level the appliance, wait for at least four hours and then connect it to the power
socket.
Do a final check to make sure that:
• All screws are tightened.
• The edges of the doors run parallel to the side edge of the appliance.
• The magnetic seal adheres to the cabinet.
• The door opens and closes correctly.
Installation 17