Table of Contents
Advertisement
4 - Help
Troubleshooting
Symptom
No picture or sound.
No sound.
Noisy picture and sound.
Picture is not clear.
Picture is light or poorly tinted.
Picture is too dark.
Remote control does not work.
Picture is not sharp.
Picture is doubled or tripled.
Picture is speckled.
Stripes on screen or colors fade.
• Ensure power cable is properly inserted in power outlet.
• Ensure power is on.
• Ensure correct input is selected.
• Ensure volume is turned up.
• Ensure sound is muted.
• Ensure headphones are not connected.
• Ensure input source is connected.
• Ensure antenna cable is properly connected.
• Ensure input source is properly connected.
• Ensure antenna is properly oriented.
• TV signals may be weak for some channels.
• Check Color setting.
• Check Tint setting.
• Check Brightness setting.
• Fluorescent lamp may have reached end of serviceable life.
• Check remote control battery.
• Keep IR sensor away from strong fluorescent lighting.
• Broadcast reception may be weak.
• Ensure antenna is properly oriented.
• Check Sharpness setting.
• Ensure antenna is properly oriented.
• Broadcast signals may be effected by mountains, buildings, etc.
• May be interference from cars, trains, high voltage lines, neon lights,
etc.
• May be interference between antenna and power cable. Try positioning
them further apart.
• May be interference from other devices. Radio and cell phone
transmission antennas may also cause interference.
• Use the LCD TV as far away as possible from devices that may cause
possible interference.
18
Solution
Advertisement
Table of Contents
