GMC Acadia 15919282 Owner's Manual page 230

3-108 Instrument Panel
Listing All Paired and Connected
Phones
b g
1. Press and hold
two seconds. The system
responds with "Ready" followed
by a tone.
2. Say "Bluetooth". The system
responds with "Bluetooth
ready" followed by a tone.
3. Say "List". The system lists all
the paired Bluetooth devices.
If a phone is connected to
the vehicle, the system will
say "Is connected" after the
connected phone.
Deleting a Paired Phone
b g
1. Press and hold
two seconds. The system
responds with "Ready" followed
by a tone.
2. Say "Bluetooth". The system
responds with "Bluetooth
ready" followed by a tone.
3. Say "Delete". The system asks
which phone to delete followed
by a tone.
for
4. Say the name of the phone to
be deleted. If the phone name is
unknown, use the "List" command
for a list of all paired phones.
The system responds with "Would
you like to delete <phone name>?
Yes or No" followed by a tone.
5. Say "Yes" to delete the phone.
The system responds with
"OK, deleting <phone name>".
Linking to a Different Phone
1. Press and hold
two seconds. The system
responds with "Ready" followed
for
by a tone.
2. Say "Bluetooth". The system
responds with "Bluetooth
ready" followed by a tone.
3. Say "Change phone".
Storing Name Tags
The system can store up to thirty
phone numbers as name tags
b g
for that are shared between the
Bluetooth and OnStar systems.
The system uses the following
commands to store and retrieve
phone numbers:
•
•
•
The system responds with
"Please wait while I search
for other phones".
•
If another phone is found,
the response will be
"<Phone name> is now
connected".
•
If another phone is not found,
the original phone remains
connected.
Store
Digit Store
Directory