GMC Acadia 15919282 Owner's Manual page 229

Pairing
A Bluetooth enabled cell phone must
be paired to the in-vehicle Bluetooth
system first and then connected to
the vehicle before it can be used.
See the cell phone manufacturers
user guide for Bluetooth functions
before pairing the cell phone. If a
Bluetooth phone is not connected,
calls will be made using OnStar
Hands-Free Calling, if available.
Refer to the OnStar owner's guide
for more information.
Pairing Information:
•
Up to five cell phones can
be paired to the in-vehicle
Bluetooth system.
•
The pairing process is disabled
when the vehicle is moving.
•
The in-vehicle Bluetooth system
automatically links with the first
available paired cell phone in the
order the phone was paired.
•
Only one paired cell phone can
be connected to the in-vehicle
Bluetooth system at a time.
•
Pairing should only need to
be completed once, unless
changes to the pairing
information have been made
or the phone is deleted.
To link to a different paired phone,
®
see Linking to a Different Phone
later in this section.
Pairing a Phone
1. Press and hold
two seconds. The system
responds with "Ready" followed
by a tone.
2. Say "Bluetooth". The system
responds with "Bluetooth
ready" followed by a tone.
3. Say "Pair". The system responds
with instructions and a four digit
PIN number. The PIN number
will be used in Step 4.
Instrument Panel
4. Start the Pairing process on the
5. The system prompts for a name
b g
for
6. The system responds with
7. Repeat Steps 1 through 7 for
cell phone that will be paired to
the vehicle. Reference the cell
phone manufacturers user guide
for information on this process.
Locate the device named
"General Motors" in the list on
the cellular phone and follow the
instructions on the cell phone
to enter the four digit PIN number
that was provided in Step 3.
for the phone. Use a name
that best describes the phone.
This name will be used to
indicate which phone is
connected. The system then
confirms the name provided.
"<Phone name> has been
successfully paired" after the
pairing process is complete.
additional phones to be paired.
3-107