Electrical Connection
Only the supply lead fitted on the recess may be used for connecting
the unit. Replacement cables can only be obtained from your local AEG
Service Centre.
A fixture must be provided in the electrical installation which allows
the appliance to be disconnected from the mains at all poles with a
contact opening width of at least 3 millimetres. Suitable isolation
devices include, e.g. cut-outs, fuses (screw type fuses are to be removed
from the holder), earth leakage trips and contactors.
Attention! Make the electrical connection in accordance with the con-
1
nection diagram.
Installation Instructions
35