Turn Signal Lamps (Side) - Chevrolet Aveo 2007 Owner's Manual

6. Install the new bulb into the socket by
pressing it in and turning it clockwise.
7. Install the socket into the lamp housing by
turning it clockwise.
8. Reverse Steps 1 through 2 under Headlamps
(Hatchback) on page 310 or Headlamps
(Sedan) on page 311 to install the assembly.

Turn Signal Lamps (Side)

To replace a side turn signal bulb, do the following:
1. Open the hood. See Hood Release on
page 274 for more information.
2. See Steps 2 through 5 under Headlamps
(Hatchback) on page 310 or Headlamps
(Sedan) on page 311 to access the side turn
signal lamps.
3. Remove the side turn signal lamp assembly
by pulling it forward.
4. Turn the bulb socket counterclockwise.
314
5. Remove the bulb from the lamp housing by
pulling the bulb straight out of the socket.
6. Install the new bulb into the bulb socket by
pushing it in and rotating the bulb socket
clockwise.
7. Push the side turn signal lamp assembly back
into its original position.