Front Turn Signal And Parking Lamps (Sedan) - Chevrolet Aveo 2007 Owner's Manual

3. Pull the front turn signal bulb socket out of the
lamp housing.
4. Press the bulb inward and turn it
counterclockwise to remove it from the bulb
socket.
5. Install the new bulb into the socket by
pressing it in and turning it clockwise.
6. Install the socket into the lamp housing by
turning it clockwise.
7. Reverse Steps 1 through 4 to install the
assembly.
Front Turn Signal and Parking
Lamps (Sedan)
To replace a front turn signal or parking lamp
bulb, do the following:
1. Open the hood. See Hood Release on
page 274 for more information.
2. Remove the headlamp assembly. See Steps 2
through 4 under Headlamps (Hatchback) on
page 310 or Headlamps (Sedan) on page 311
for instructions on how to remove the
headlamp assembly.
3. Turn the front turn signal bulb socket
counterclockwise.
4. Pull the front turn signal bulb socket out of the
lamp housing.
5. Press the bulb inward and turn it
counterclockwise to remove it from the bulb
socket.
313